Слайд 2File list
1. setup.exe
update tool
2. YDXJ**.elf
firmware file
note:
Check your camera SN at the battery compartment
Z2215** matches
YDXJV22_1.2.6**.elf
Z22L5** matches YDXJV22L_1.2.6**.elf
Слайд 3Installing and Updating
Double click on “setup.exe” and Install the USB
tool
It’s named as “yiSportCamUSB”
Слайд 4Preparing the Hardware:
Dismantle the front panel of the camera
Connect the
camera USB to PC with a micro USB cable
Use tweezers
to short-circuit in two points
> One point above the Resistor
> One point at GND
Press the power button and turn on the camera
Слайд 5Preparing the Hardware: image
Слайд 6Updating the Firmware
Open yiSportCamUSB
Слайд 7Updating the Firmware
Check “Firmware Programming” radio button
Click on “Connect” button
If
the short-circuit is successful, yiSportCamUSB will prompt “Found 1 YDXJ
device!”
Слайд 8Updating the Firmware
4. Click on “Choose” button and choose the
option YDXJV22_1.2.6**.elf
Слайд 9Updating the Firmware
5. Click on “Download” button and update the
firmware
The status label will show “OK”, the text
will show “Done!!” and
the camera will beep 3 times later.
Now, the upgrade is complete.